Санитарный пневматический мембранный клапан
The Pneumatic Diaphragm Valve is an automated sanitary valve actuated by compressed air. It integrates a hygienic stainless steel valve body with a pneumatic actuator (single-acting spring-return or double-acting) for reliable, repeatable on-off or modulating control in automated process lines. The valve can be fitted with a positioner, solenoid valve, limit switch, or position indicator to suit various automation and control system requirements.
Санитарный пневматический мембранный клапан
Ключевые особенности
- Pneumatic actuation provides fast, reliable open-close operation
- Available in single-acting (spring-return fail-safe) or double-acting configuration
- Compatible with fieldbus, NAMUR, and DCS control systems
- Optional solenoid valve, positioner, and feedback position indicator
- Fully hygienic body design meeting FDA requirements
- High cycle life and consistent sealing force
- Suitable for integration into automated CIP and SIP sequences
- Wide range of actuator sizes to match required torque for different line sizes
Технические характеристики
- Максимальное рабочее давление: 10 бар (145 фунтов на кв. дюйм)
- Minimum Operating Pressure: Full vacuum (0 bar absolute)
- Operating Temperature: -10 C to 150 C (process fluid)
- Supply Air Pressure: 4 to 8 bar (58 to 116 psi)
- Surface Roughness: Ra≤ 0.8 um um
- Материал корпуса: нержавеющая сталь AISI 316L (1.4404)
- Seal / Diaphragm Material: EPDM, PTFE, Silicone
- Actuation Mechanism: Pneumatic actuator (single-acting or double-acting)
Применение
- Automated pharmaceutical and biotech production lines
- Aseptic food and beverage filling and processing systems
- Dairy processing automation (pasteurisation, separation)
- CIP and SIP skid manifold control
- Semiconductor ultra-pure water and chemical distribution
- Cosmetics and personal care automated batch processing
